Front panel LEDs and buttons (SL170s G6)
The table below describes LEDs and buttons for one server only. Each server contains the same LEDs and buttons in the same orientation.
|
Item |
Description |
Status |
|---|---|---|
|
1 |
UID LED/button |
Blue = Identification Flashing blue = The system is being remotely managed. Off = Deactivated |
|
2 |
Health LED |
Red = Critical system failure detected Amber = The system is degraded. Green = The system is powered on, and no failure is detected. Off = The system is off, and no failure was detected prior to system power down. |
|
3 |
Power button/LED |
Green = Normal Amber = The server is powered off or in a hibernation state with AC power. Red = Critical error. For more information, see SEL. |
|
4 |
NIC activity LED |
Flashing green = Network data activity exists. Off = No network data activity exists, or no network connection exists. |
|
5 |
NIC speed LED |
Green = The LAN connection is using a GbE link. Amber = The LAN connection is using a 10 Mbps/100 Mbps link. Off = No LAN connection exists. |
|
6 |
Management connector activity LED (iLO) |
Flashing amber = LAN is active. |
|
7 |
Management connector link LED (iLO) |
Green = Linking at 100 Mbps speed Off = No connection exists or linking at 10 Mbps speed. |