PCI expansion slot definitions (DL380 G7)
Always install an InfiniBand PCIe HCA in slot 4 of this server.
|
Secondary (slot – form factor) |
Primary (slot – form factor) |
PCIe2 riser |
PCIe2 x16 riser |
PCIe2/PCI-X riser |
|---|---|---|---|---|
|
4 – FL/FH |
1 – FL/FH |
PCIe2 x16 (8,4,1) |
PCIe2 x16 (16,8,4,1) |
PCI-X 64 bit/133 MHz |
|
5 – LP |
2 – HL/FH |
PCIe2 x8 (4,1) |
— |
PCIe2 x16 (8,4,1) |
|
6 – LP |
3 – HL/FH |
PCIe2 x8 (4,1) |
— |
PCIe2 x8 (4,1) |
Notes:
- “Primary” denotes the risers are installed in the primary riser connector.
- “Secondary” denotes the risers are installed in the secondary riser connector.
- Installing the risers listed in the table above in either the primary or secondary riser connectors determines the form factor of the PCI cards supported by those risers.
- FL/FH denotes full-length, full-height. HL/FH denotes half-length, full-height. LP denotes low profile.
- The PCIe2 x16 riser supports a maximum power of 150 W with an HP power cable. This cable must be used for PCIe card wattages greater than 75 W.
