PCI expansion slot definitions (DL380 G6)
Always install an InfiniBand PCIe HCA in slot 4 of this server.
|
Primary (slot – form factor) |
Secondary (slot – form factor) |
PCIe riser |
PCIe x16 riser |
PCIe/PCI-X riser |
|---|---|---|---|---|
|
1 – FL/FH |
4 – FL/FH |
PCIe x16 (8,4,1) |
PCIe x16 (16,8,4,1) |
PCI-X 64-bit/133-MHz |
|
2 – HL/FH |
5 – LP |
PCIe x8 (4,1) |
— |
PCIe x16 (8,4,1) |
|
3 – HL/FH |
6 – LP |
PCIe x8 (4,1) |
— |
PCIe x8 (4,1) |
Notes:
- “Primary” denotes the risers are installed in the primary riser connector.
- “Secondary” denotes the risers are installed in the secondary riser connector.
- FL/FH denotes full-length, full-height. HL/FH denotes half-length, full-height. LP denotes low profile.
- The PCIe x16 riser supports a maximum power of 150W with an HP power cable. The cable supplied with the riser must be used for PCIe card wattages greater than 75W.
